Two-piece Installation Guide

By July 9, 2019 Getting Started

How to install your two-piece terminal

  1. Remove the VX 520 Colour terminal rear cover to access all the connection ports
  2. Plug the power supply unit (A) into the terminal port marked with the lightning bolt (B), rotate the power plug counter-clockwise until flush with the side panel to lock in place
  3. Connect the VX 520 Colour to the VX 820 PIN pad by plugging the curly interconnect cable from the PIN pad into the RS232 port
  4. Plug the power supply unit into the wall socket and turn on at the wall

Watch a step-by-step video on how to install your two-piece terminal here.